Red Bull RB17 revealed with atmo V10 and F1 tech

Newey told Autocar there are three fundamental goals for the project: to look great – “at this level, cars should be considered pieces of art”; to sound great; and to ensure drivers of “all levels can go out, enjoy themselves and improve themselves”, not just F1 drivers.

The sheer volume of technology on the car enables a high degree of adjustability to myriad systems. But while the performance levels are prodigious, Newey wants the carbonfibre RB17 to remain accessible and exploitable, even for less experienced drivers.

“As long as you have a reasonable amount of track experience, then this is a car you can enjoy right from the start,” said Newey. “But at its ultimate performance level, then it’s capable of Formula 1 lap times.”

The original plan was to make the car four-wheel drive with a twin-turbocharged V8 engine driving the rear wheels and an electric motor driving the front wheels. However, the final production model will use a high-revving, normally aspirated V10 developed by Cosworth and mated to a more conventional hybrid system.

The 986bhp V10 revs all the way to 15,000rpm. The engine is hooked up to a carbonfibre transmission of Red Bull’s own design related to the one used in its F1 car that integrates a 197bhp electric motor. This not only provides performance assistance but also acts as a starter motor and reverse gear and helps the car move away from a standstill.

The RB17 weighs just 805kg in its lightest form, shorn of items such as air conditioning and a glass windscreen, and it is around five metres long and two metres wide.

The model revealed at Goodwood is a design from last August. Newey said development work since then has made the car “a little bit smaller”.

Three tyre options will be offered. Each has been developed in conjunction with Michelin especially for the RB17, including a slick that unlocks the car’s full performance potential.

Although the car is not road legal, Newey suggested that people will be able to convert it for road use should they wish. Being a track-only car from the factory, it is not bound by legislation around emissions and safety although Newey said it has been designed to comply with LMH motorsport safety regulations.

The RB17 is not eligible to compete in any existing race series, so Red Bull will instead offer customers bespoke track days and experiences. While its F1 drivers, including Verstappen, will drive the car on the simulator to aid development, a much broader range of drivers will also be invited to test it to ensure that it will be as accessible as possible.

Red Bull will manufacture the 50 cars in-house over two years. Aside from the engine, which comes from Cosworth instead of Honda, it is using the same suppliers as it does for its F1 cars.

Q&A, Adrian Newey, chief technical officer, Red Bull Technology Group

Why has Red Bull decided to make this car?

When Red Bull does something, it always wants to do it to the highest level and to create a new landmark. Maybe this sounds a little arrogant, but I think this car will go down as a landmark car. It’s a car that you can arrive at a track, put your helmet on, turn the key, drive off down the pit lane and do a Formula 1 lap time. That, I think, is a totally unique thing.

How different is it to the Valkyrie?

They are very different projects in truth. Valkyrie was the first project Red Bull Advanced Technologies undertook in 2014. It was a very young and inexperienced team that had never done a project like that before. That team has stayed together ever since, and has grown, both in experience and numbers significantly. That, combined with taking much more time in the research stage, has meant that we've done a lot more homework and we had the opportunity to do the foundry. And of course, these things move on. There are a lot of things in this car that we have added that Valkyrie doesn't have. It has interior storage space, it has luggage space for two helmets and two bags. The engine is now rubber mounted rather than solid mounted to reduce cabin noise levels. It has cost us 10kg in weight but again it’s a solution to come up with a very rounded product. When you're in the cabin, you hear the combustion noise: good noise.

Why the switch from a V8 to a V10?

We started out with the twin-turbo V8 twin because we needed around 1000 horsepower from the combustion engine, and the only way to get that with our target engine weight [of 150kg] was with a turbo. Then we started working with our own powertrain division to look at how we can get the power out of a normally aspirated engine? The answer was rpm, but how do we achieve a high rpm? That meant going to pneumatic valves instead of valve springs. We’re continuing to do durability work to get a normally aspirated V10 that weighs 150kg, revs to 15,000rpm and has 1000hp.

Have you got involved in the styling?

It’s been fun because [in F1] the stopwatch is the master, so the aerodynamic solutions have to be performance driven rather than style driven. Having said that, I do think that very often elegant solutions also have a habit of looking beautiful. Three obvious examples of that would be Spitfire, Concorde and the Bluebird record cars. When we’re drawing, we're conscious of trying to come up with elegant solutions that also look good.